| /* |
| * Copyright (C) 2022 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "perfetto/base/build_config.h" |
| |
| #if PERFETTO_BUILDFLAG(PERFETTO_OS_ANDROID) |
| |
| #include "perfetto/base/logging.h" |
| #include "perfetto/ext/base/file_utils.h" |
| #include "perfetto/ext/base/pipe.h" |
| #include "perfetto/ext/base/scoped_file.h" |
| #include "perfetto/ext/base/string_utils.h" |
| #include "perfetto/ext/base/utils.h" |
| #include "perfetto/ext/tracing/core/commit_data_request.h" |
| #include "perfetto/ext/tracing/core/trace_packet.h" |
| #include "perfetto/ext/tracing/core/tracing_service.h" |
| #include "perfetto/protozero/scattered_heap_buffer.h" |
| #include "src/base/test/test_task_runner.h" |
| #include "src/base/test/utils.h" |
| #include "test/gtest_and_gmock.h" |
| #include "test/test_helper.h" |
| |
| #include "protos/perfetto/config/power/android_power_config.pbzero.h" |
| #include "protos/perfetto/config/test_config.gen.h" |
| #include "protos/perfetto/config/trace_config.gen.h" |
| #include "protos/perfetto/trace/ftrace/ftrace.gen.h" |
| #include "protos/perfetto/trace/ftrace/ftrace_event.gen.h" |
| #include "protos/perfetto/trace/ftrace/ftrace_event_bundle.gen.h" |
| #include "protos/perfetto/trace/ftrace/ftrace_stats.gen.h" |
| #include "protos/perfetto/trace/perfetto/tracing_service_event.gen.h" |
| #include "protos/perfetto/trace/power/battery_counters.gen.h" |
| #include "protos/perfetto/trace/test_event.gen.h" |
| #include "protos/perfetto/trace/trace.gen.h" |
| #include "protos/perfetto/trace/trace_packet.gen.h" |
| #include "protos/perfetto/trace/trace_packet.pbzero.h" |
| #include "protos/perfetto/trace/trigger.gen.h" |
| |
| #include "protos/perfetto/common/sys_stats_counters.gen.h" |
| #include "protos/perfetto/config/sys_stats/sys_stats_config.gen.h" |
| #include "protos/perfetto/trace/sys_stats/sys_stats.gen.h" |
| |
| namespace perfetto { |
| |
| namespace { |
| |
| using ::testing::ContainsRegex; |
| using ::testing::Each; |
| using ::testing::ElementsAreArray; |
| using ::testing::HasSubstr; |
| using ::testing::Property; |
| using ::testing::SizeIs; |
| |
| } // namespace |
| |
| TEST(PerfettoAndroidIntegrationTest, TestKmemActivity) { |
| using C = protos::gen::VmstatCounters; |
| |
| base::TestTaskRunner task_runner; |
| |
| TestHelper helper(&task_runner); |
| |
| helper.StartServiceIfRequired(); |
| |
| #if PERFETTO_BUILDFLAG(PERFETTO_START_DAEMONS) |
| ProbesProducerThread probes(GetTestProducerSockName()); |
| probes.Connect(); |
| #endif |
| |
| auto* producer = helper.ConnectFakeProducer(); |
| helper.ConnectConsumer(); |
| helper.WaitForConsumerConnect(); |
| helper.WaitForDataSourceConnected("linux.ftrace"); |
| |
| TraceConfig trace_config; |
| trace_config.add_buffers()->set_size_kb(1024); |
| trace_config.set_unique_session_name("kmem_activity_test"); |
| |
| auto* ftrace_ds_config = trace_config.add_data_sources()->mutable_config(); |
| ftrace_ds_config->set_name("linux.ftrace"); |
| protos::gen::FtraceConfig ftrace_config = CreateFtraceConfig({ |
| "vmscan/mm_vmscan_kswapd_wake", |
| "vmscan/mm_vmscan_kswapd_sleep", |
| "vmscan/mm_vmscan_direct_reclaim_begin", |
| "vmscan/mm_vmscan_direct_reclaim_end", |
| "compaction/mm_compaction_begin", |
| "compaction/mm_compaction_end", |
| }); |
| ftrace_ds_config->set_ftrace_config_raw(ftrace_config.SerializeAsString()); |
| |
| auto* sys_stats_ds_config = trace_config.add_data_sources()->mutable_config(); |
| sys_stats_ds_config->set_name("linux.sys_stats"); |
| protos::gen::SysStatsConfig sys_stats_config; |
| sys_stats_config.set_vmstat_period_ms(50); |
| std::vector<C> vmstat_counters = { |
| C::VMSTAT_NR_FREE_PAGES, |
| C::VMSTAT_NR_SLAB_RECLAIMABLE, |
| C::VMSTAT_NR_SLAB_UNRECLAIMABLE, |
| C::VMSTAT_NR_ACTIVE_FILE, |
| C::VMSTAT_NR_INACTIVE_FILE, |
| C::VMSTAT_NR_ACTIVE_ANON, |
| C::VMSTAT_NR_INACTIVE_ANON, |
| C::VMSTAT_WORKINGSET_REFAULT, |
| C::VMSTAT_WORKINGSET_ACTIVATE, |
| C::VMSTAT_NR_FILE_PAGES, |
| C::VMSTAT_PGPGIN, |
| C::VMSTAT_PGPGOUT, |
| C::VMSTAT_PSWPIN, |
| C::VMSTAT_PSWPOUT, |
| C::VMSTAT_PGSTEAL_KSWAPD_DMA, |
| C::VMSTAT_PGSTEAL_KSWAPD_NORMAL, |
| C::VMSTAT_PGSTEAL_KSWAPD_MOVABLE, |
| C::VMSTAT_PGSTEAL_DIRECT_DMA, |
| C::VMSTAT_PGSTEAL_DIRECT_NORMAL, |
| C::VMSTAT_PGSTEAL_DIRECT_MOVABLE, |
| C::VMSTAT_PGSCAN_KSWAPD_DMA, |
| C::VMSTAT_PGSCAN_KSWAPD_NORMAL, |
| C::VMSTAT_PGSCAN_KSWAPD_MOVABLE, |
| C::VMSTAT_PGSCAN_DIRECT_DMA, |
| C::VMSTAT_PGSCAN_DIRECT_NORMAL, |
| C::VMSTAT_PGSCAN_DIRECT_MOVABLE, |
| C::VMSTAT_COMPACT_MIGRATE_SCANNED, |
| C::VMSTAT_COMPACT_FREE_SCANNED, |
| }; |
| for (const auto& counter : vmstat_counters) { |
| sys_stats_config.add_vmstat_counters(counter); |
| } |
| sys_stats_ds_config->set_sys_stats_config_raw( |
| sys_stats_config.SerializeAsString()); |
| |
| auto* trigger_cfg = trace_config.mutable_trigger_config(); |
| trigger_cfg->set_trigger_mode( |
| protos::gen::TraceConfig::TriggerConfig::START_TRACING); |
| trigger_cfg->set_trigger_timeout_ms(15000); |
| auto* trigger = trigger_cfg->add_triggers(); |
| trigger->set_name("kmem_activity"); |
| // |stop_delay_ms| must be long enough that we can write the packets in |
| // before the trace finishes. |
| trigger->set_stop_delay_ms(1000); |
| |
| helper.StartTracing(trace_config); |
| |
| // Linearize with StartTracing. This ensures that the service has seen the |
| // StartTracing IPC and has armed the triggers. |
| helper.FlushAndWait(kDefaultTestTimeoutMs); |
| |
| // Generating synthetic memory pressure to trigger kmem activity is |
| // inherently flaky on different devices. The same goes for writing |
| // /proc/sys/vm/compact_memory to trigger compaction, since compaction is |
| // only started if needed (even if explicitly triggered from proc). |
| // Trigger kmem activity using perfetto trigger. |
| producer->ActivateTrigger("kmem_activity"); |
| |
| helper.WaitForTracingDisabled(); |
| |
| helper.ReadData(); |
| helper.WaitForReadData(); |
| |
| const auto& packets = helper.trace(); |
| ASSERT_GT(packets.size(), 0u); |
| |
| bool sys_stats_captured = false; |
| for (const auto& packet : packets) { |
| for (int ev = 0; ev < packet.ftrace_events().event_size(); ev++) { |
| auto ftrace_event = |
| packet.ftrace_events().event()[static_cast<size_t>(ev)]; |
| ASSERT_TRUE(ftrace_event.has_mm_vmscan_kswapd_wake() || |
| ftrace_event.has_mm_vmscan_kswapd_sleep() || |
| ftrace_event.has_mm_vmscan_direct_reclaim_begin() || |
| ftrace_event.has_mm_vmscan_direct_reclaim_end() || |
| ftrace_event.has_mm_compaction_begin() || |
| ftrace_event.has_mm_compaction_end()); |
| } |
| |
| if (packet.has_sys_stats()) { |
| sys_stats_captured = true; |
| const auto& sys_stats = packet.sys_stats(); |
| const auto& vmstat = sys_stats.vmstat(); |
| ASSERT_GT(vmstat.size(), 0u); |
| for (const auto& vmstat_value : vmstat) { |
| ASSERT_NE(std::find(vmstat_counters.begin(), vmstat_counters.end(), |
| vmstat_value.key()), |
| vmstat_counters.end()); |
| } |
| } |
| } |
| |
| // Don't explicitly check that ftrace events were captured, since this test |
| // doesn't rely on memory pressure. |
| ASSERT_TRUE(sys_stats_captured); |
| } |
| |
| TEST(PerfettoAndroidIntegrationTest, TestBatteryTracing) { |
| base::TestTaskRunner task_runner; |
| |
| TestHelper helper(&task_runner); |
| helper.StartServiceIfRequired(); |
| |
| #if PERFETTO_BUILDFLAG(PERFETTO_START_DAEMONS) |
| ProbesProducerThread probes(GetTestProducerSockName()); |
| probes.Connect(); |
| #endif |
| |
| helper.ConnectConsumer(); |
| helper.WaitForConsumerConnect(); |
| |
| TraceConfig trace_config; |
| trace_config.add_buffers()->set_size_kb(128); |
| trace_config.set_duration_ms(3000); |
| |
| auto* ds_config = trace_config.add_data_sources()->mutable_config(); |
| ds_config->set_name("android.power"); |
| ds_config->set_target_buffer(0); |
| |
| using protos::pbzero::AndroidPowerConfig; |
| protozero::HeapBuffered<AndroidPowerConfig> power_config; |
| power_config->set_battery_poll_ms(250); |
| power_config->add_battery_counters( |
| AndroidPowerConfig::BATTERY_COUNTER_CHARGE); |
| power_config->add_battery_counters( |
| AndroidPowerConfig::BATTERY_COUNTER_CAPACITY_PERCENT); |
| ds_config->set_android_power_config_raw(power_config.SerializeAsString()); |
| |
| helper.StartTracing(trace_config); |
| helper.WaitForTracingDisabled(); |
| |
| helper.ReadData(); |
| helper.WaitForReadData(); |
| |
| const auto& packets = helper.trace(); |
| ASSERT_GT(packets.size(), 0u); |
| |
| bool has_battery_packet = false; |
| for (const auto& packet : packets) { |
| if (!packet.has_battery()) |
| continue; |
| has_battery_packet = true; |
| // Unfortunately we cannot make any assertions on the charge counter. |
| // On some devices it can reach negative values (b/64685329). |
| EXPECT_GE(packet.battery().capacity_percent(), 0.f); |
| EXPECT_LE(packet.battery().capacity_percent(), 100.f); |
| } |
| |
| ASSERT_TRUE(has_battery_packet); |
| } |
| |
| } // namespace perfetto |
| |
| #endif // PERFETTO_OS_ANDROID |