| /* |
| * Copyright (C) 2019 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "src/trace_processor/rpc/rpc.h" |
| |
| #include <cinttypes> |
| #include <cstdint> |
| #include <cstdio> |
| #include <cstring> |
| #include <memory> |
| #include <string> |
| #include <utility> |
| #include <vector> |
| |
| #include "perfetto/base/logging.h" |
| #include "perfetto/base/status.h" |
| #include "perfetto/base/time.h" |
| #include "perfetto/ext/base/version.h" |
| #include "perfetto/ext/protozero/proto_ring_buffer.h" |
| #include "perfetto/ext/trace_processor/rpc/query_result_serializer.h" |
| #include "perfetto/protozero/field.h" |
| #include "perfetto/protozero/scattered_heap_buffer.h" |
| #include "perfetto/trace_processor/basic_types.h" |
| #include "perfetto/trace_processor/metatrace_config.h" |
| #include "perfetto/trace_processor/trace_processor.h" |
| #include "src/trace_processor/tp_metatrace.h" |
| |
| #include "protos/perfetto/trace_processor/metatrace_categories.pbzero.h" |
| #include "protos/perfetto/trace_processor/trace_processor.pbzero.h" |
| |
| namespace perfetto::trace_processor { |
| |
| namespace { |
| // Writes a "Loading trace ..." update every N bytes. |
| constexpr size_t kProgressUpdateBytes = 50ul * 1000 * 1000; |
| using TraceProcessorRpcStream = protos::pbzero::TraceProcessorRpcStream; |
| using RpcProto = protos::pbzero::TraceProcessorRpc; |
| |
| // Most RPC messages are either very small or a query results. |
| // QueryResultSerializer splits rows into batches of approximately 128KB. Try |
| // avoid extra heap allocations for the nominal case. |
| constexpr auto kSliceSize = |
| QueryResultSerializer::kDefaultBatchSplitThreshold + 4096; |
| |
| // Holds a trace_processor::TraceProcessorRpc pbzero message. Avoids extra |
| // copies by doing direct scattered calls from the fragmented heap buffer onto |
| // the RpcResponseFunction (the receiver is expected to deal with arbitrary |
| // fragmentation anyways). It also takes care of prefixing each message with |
| // the proto preamble and varint size. |
| class Response { |
| public: |
| Response(int64_t seq, int method); |
| Response(const Response&) = delete; |
| Response& operator=(const Response&) = delete; |
| RpcProto* operator->() { return msg_; } |
| void Send(Rpc::RpcResponseFunction); |
| |
| private: |
| RpcProto* msg_ = nullptr; |
| |
| // The reason why we use TraceProcessorRpcStream as root message is because |
| // the RPC wire protocol expects each message to be prefixed with a proto |
| // preamble and varint size. This happens to be the same serialization of a |
| // repeated field (this is really the same trick we use between |
| // Trace and TracePacket in trace.proto) |
| protozero::HeapBuffered<TraceProcessorRpcStream> buf_; |
| }; |
| |
| Response::Response(int64_t seq, int method) : buf_(kSliceSize, kSliceSize) { |
| msg_ = buf_->add_msg(); |
| msg_->set_seq(seq); |
| msg_->set_response(static_cast<RpcProto::TraceProcessorMethod>(method)); |
| } |
| |
| void Response::Send(Rpc::RpcResponseFunction send_fn) { |
| buf_->Finalize(); |
| for (const auto& slice : buf_.GetSlices()) { |
| auto range = slice.GetUsedRange(); |
| send_fn(range.begin, static_cast<uint32_t>(range.size())); |
| } |
| } |
| |
| } // namespace |
| |
| Rpc::Rpc(std::unique_ptr<TraceProcessor> preloaded_instance) |
| : trace_processor_(std::move(preloaded_instance)) { |
| if (!trace_processor_) |
| ResetTraceProcessorInternal(Config()); |
| } |
| |
| Rpc::Rpc() : Rpc(nullptr) {} |
| Rpc::~Rpc() = default; |
| |
| void Rpc::ResetTraceProcessorInternal(const Config& config) { |
| trace_processor_config_ = config; |
| trace_processor_ = TraceProcessor::CreateInstance(config); |
| bytes_parsed_ = bytes_last_progress_ = 0; |
| t_parse_started_ = base::GetWallTimeNs().count(); |
| // Deliberately not resetting the RPC channel state (rxbuf_, {tx,rx}_seq_id_). |
| // This is invoked from the same client to clear the current trace state |
| // before loading a new one. The IPC channel is orthogonal to that and the |
| // message numbering continues regardless of the reset. |
| } |
| |
| void Rpc::OnRpcRequest(const void* data, size_t len) { |
| rxbuf_.Append(data, len); |
| for (;;) { |
| auto msg = rxbuf_.ReadMessage(); |
| if (!msg.valid()) { |
| if (msg.fatal_framing_error) { |
| protozero::HeapBuffered<TraceProcessorRpcStream> err_msg; |
| err_msg->add_msg()->set_fatal_error("RPC framing error"); |
| auto err = err_msg.SerializeAsArray(); |
| rpc_response_fn_(err.data(), static_cast<uint32_t>(err.size())); |
| rpc_response_fn_(nullptr, 0); // Disconnect. |
| } |
| break; |
| } |
| ParseRpcRequest(msg.start, msg.len); |
| } |
| } |
| |
| namespace { |
| |
| using ProtoEnum = protos::pbzero::MetatraceCategories; |
| TraceProcessor::MetatraceCategories MetatraceCategoriesToPublicEnum( |
| ProtoEnum categories) { |
| TraceProcessor::MetatraceCategories result = |
| TraceProcessor::MetatraceCategories::NONE; |
| if (categories & ProtoEnum::QUERY_TIMELINE) { |
| result = static_cast<TraceProcessor::MetatraceCategories>( |
| result | TraceProcessor::MetatraceCategories::QUERY_TIMELINE); |
| } |
| if (categories & ProtoEnum::QUERY_DETAILED) { |
| result = static_cast<TraceProcessor::MetatraceCategories>( |
| result | TraceProcessor::MetatraceCategories::QUERY_DETAILED); |
| } |
| if (categories & ProtoEnum::FUNCTION_CALL) { |
| result = static_cast<TraceProcessor::MetatraceCategories>( |
| result | TraceProcessor::MetatraceCategories::FUNCTION_CALL); |
| } |
| if (categories & ProtoEnum::DB) { |
| result = static_cast<TraceProcessor::MetatraceCategories>( |
| result | TraceProcessor::MetatraceCategories::DB); |
| } |
| if (categories & ProtoEnum::API_TIMELINE) { |
| result = static_cast<TraceProcessor::MetatraceCategories>( |
| result | TraceProcessor::MetatraceCategories::API_TIMELINE); |
| } |
| return result; |
| } |
| |
| } // namespace |
| |
| // [data, len] here is a tokenized TraceProcessorRpc proto message, without the |
| // size header. |
| void Rpc::ParseRpcRequest(const uint8_t* data, size_t len) { |
| RpcProto::Decoder req(data, len); |
| |
| // We allow restarting the sequence from 0. This happens when refreshing the |
| // browser while using the external trace_processor_shell --httpd. |
| if (req.seq() != 0 && rx_seq_id_ != 0 && req.seq() != rx_seq_id_ + 1) { |
| char err_str[255]; |
| // "(ERR:rpc_seq)" is intercepted by error_dialog.ts in the UI. |
| snprintf(err_str, sizeof(err_str), |
| "RPC request out of order. Expected %" PRId64 ", got %" PRId64 |
| " (ERR:rpc_seq)", |
| rx_seq_id_ + 1, req.seq()); |
| PERFETTO_ELOG("%s", err_str); |
| protozero::HeapBuffered<TraceProcessorRpcStream> err_msg; |
| err_msg->add_msg()->set_fatal_error(err_str); |
| auto err = err_msg.SerializeAsArray(); |
| rpc_response_fn_(err.data(), static_cast<uint32_t>(err.size())); |
| rpc_response_fn_(nullptr, 0); // Disconnect. |
| return; |
| } |
| rx_seq_id_ = req.seq(); |
| |
| // The static cast is to prevent that the compiler breaks future proofness. |
| const int req_type = static_cast<int>(req.request()); |
| static const char kErrFieldNotSet[] = "RPC error: request field not set"; |
| switch (req_type) { |
| case RpcProto::TPM_APPEND_TRACE_DATA: { |
| Response resp(tx_seq_id_++, req_type); |
| auto* result = resp->set_append_result(); |
| if (!req.has_append_trace_data()) { |
| result->set_error(kErrFieldNotSet); |
| } else { |
| protozero::ConstBytes byte_range = req.append_trace_data(); |
| base::Status res = Parse(byte_range.data, byte_range.size); |
| if (!res.ok()) { |
| result->set_error(res.message()); |
| } |
| } |
| resp.Send(rpc_response_fn_); |
| break; |
| } |
| case RpcProto::TPM_FINALIZE_TRACE_DATA: { |
| Response resp(tx_seq_id_++, req_type); |
| NotifyEndOfFile(); |
| resp.Send(rpc_response_fn_); |
| break; |
| } |
| case RpcProto::TPM_QUERY_STREAMING: { |
| if (!req.has_query_args()) { |
| Response resp(tx_seq_id_++, req_type); |
| auto* result = resp->set_query_result(); |
| result->set_error(kErrFieldNotSet); |
| resp.Send(rpc_response_fn_); |
| } else { |
| protozero::ConstBytes args = req.query_args(); |
| auto it = QueryInternal(args.data, args.size); |
| QueryResultSerializer serializer(std::move(it)); |
| for (bool has_more = true; has_more;) { |
| Response resp(tx_seq_id_++, req_type); |
| has_more = serializer.Serialize(resp->set_query_result()); |
| resp.Send(rpc_response_fn_); |
| } |
| } |
| break; |
| } |
| case RpcProto::TPM_COMPUTE_METRIC: { |
| Response resp(tx_seq_id_++, req_type); |
| auto* result = resp->set_metric_result(); |
| if (!req.has_compute_metric_args()) { |
| result->set_error(kErrFieldNotSet); |
| } else { |
| protozero::ConstBytes args = req.compute_metric_args(); |
| ComputeMetricInternal(args.data, args.size, result); |
| } |
| resp.Send(rpc_response_fn_); |
| break; |
| } |
| case RpcProto::TPM_GET_METRIC_DESCRIPTORS: { |
| Response resp(tx_seq_id_++, req_type); |
| auto descriptor_set = trace_processor_->GetMetricDescriptors(); |
| auto* result = resp->set_metric_descriptors(); |
| result->AppendRawProtoBytes(descriptor_set.data(), descriptor_set.size()); |
| resp.Send(rpc_response_fn_); |
| break; |
| } |
| case RpcProto::TPM_RESTORE_INITIAL_TABLES: { |
| trace_processor_->RestoreInitialTables(); |
| Response resp(tx_seq_id_++, req_type); |
| resp.Send(rpc_response_fn_); |
| break; |
| } |
| case RpcProto::TPM_ENABLE_METATRACE: { |
| using protos::pbzero::MetatraceCategories; |
| protozero::ConstBytes args = req.enable_metatrace_args(); |
| EnableMetatrace(args.data, args.size); |
| |
| Response resp(tx_seq_id_++, req_type); |
| resp.Send(rpc_response_fn_); |
| break; |
| } |
| case RpcProto::TPM_DISABLE_AND_READ_METATRACE: { |
| Response resp(tx_seq_id_++, req_type); |
| DisableAndReadMetatraceInternal(resp->set_metatrace()); |
| resp.Send(rpc_response_fn_); |
| break; |
| } |
| case RpcProto::TPM_GET_STATUS: { |
| Response resp(tx_seq_id_++, req_type); |
| std::vector<uint8_t> status = GetStatus(); |
| resp->set_status()->AppendRawProtoBytes(status.data(), status.size()); |
| resp.Send(rpc_response_fn_); |
| break; |
| } |
| case RpcProto::TPM_RESET_TRACE_PROCESSOR: { |
| Response resp(tx_seq_id_++, req_type); |
| protozero::ConstBytes args = req.reset_trace_processor_args(); |
| ResetTraceProcessor(args.data, args.size); |
| resp.Send(rpc_response_fn_); |
| break; |
| } |
| default: { |
| // This can legitimately happen if the client is newer. We reply with a |
| // generic "unkown request" response, so the client can do feature |
| // detection |
| PERFETTO_DLOG("[RPC] Uknown request type (%d), size=%zu", req_type, len); |
| Response resp(tx_seq_id_++, req_type); |
| resp->set_invalid_request( |
| static_cast<RpcProto::TraceProcessorMethod>(req_type)); |
| resp.Send(rpc_response_fn_); |
| break; |
| } |
| } // switch(req_type) |
| } |
| |
| base::Status Rpc::Parse(const uint8_t* data, size_t len) { |
| PERFETTO_TP_TRACE( |
| metatrace::Category::API_TIMELINE, "RPC_PARSE", |
| [&](metatrace::Record* r) { r->AddArg("length", std::to_string(len)); }); |
| if (eof_) { |
| // Reset the trace processor state if another trace has been previously |
| // loaded. Use the same TraceProcessor Config. |
| ResetTraceProcessorInternal(trace_processor_config_); |
| } |
| |
| eof_ = false; |
| bytes_parsed_ += len; |
| MaybePrintProgress(); |
| |
| if (len == 0) |
| return base::OkStatus(); |
| |
| // TraceProcessor needs take ownership of the memory chunk. |
| std::unique_ptr<uint8_t[]> data_copy(new uint8_t[len]); |
| memcpy(data_copy.get(), data, len); |
| return trace_processor_->Parse(std::move(data_copy), len); |
| } |
| |
| void Rpc::NotifyEndOfFile() { |
| PERFETTO_TP_TRACE(metatrace::Category::API_TIMELINE, |
| "RPC_NOTIFY_END_OF_FILE"); |
| |
| trace_processor_->NotifyEndOfFile(); |
| eof_ = true; |
| MaybePrintProgress(); |
| } |
| |
| void Rpc::ResetTraceProcessor(const uint8_t* args, size_t len) { |
| protos::pbzero::ResetTraceProcessorArgs::Decoder reset_trace_processor_args( |
| args, len); |
| Config config; |
| if (reset_trace_processor_args.has_drop_track_event_data_before()) { |
| config.drop_track_event_data_before = |
| reset_trace_processor_args.drop_track_event_data_before() == |
| protos::pbzero::ResetTraceProcessorArgs:: |
| TRACK_EVENT_RANGE_OF_INTEREST |
| ? DropTrackEventDataBefore::kTrackEventRangeOfInterest |
| : DropTrackEventDataBefore::kNoDrop; |
| } |
| if (reset_trace_processor_args.has_ingest_ftrace_in_raw_table()) { |
| config.ingest_ftrace_in_raw_table = |
| reset_trace_processor_args.ingest_ftrace_in_raw_table(); |
| } |
| if (reset_trace_processor_args.has_analyze_trace_proto_content()) { |
| config.analyze_trace_proto_content = |
| reset_trace_processor_args.analyze_trace_proto_content(); |
| } |
| if (reset_trace_processor_args.has_ftrace_drop_until_all_cpus_valid()) { |
| config.soft_drop_ftrace_data_before = |
| reset_trace_processor_args.ftrace_drop_until_all_cpus_valid() |
| ? SoftDropFtraceDataBefore::kAllPerCpuBuffersValid |
| : SoftDropFtraceDataBefore::kNoDrop; |
| } |
| ResetTraceProcessorInternal(config); |
| } |
| |
| void Rpc::MaybePrintProgress() { |
| if (eof_ || bytes_parsed_ - bytes_last_progress_ > kProgressUpdateBytes) { |
| bytes_last_progress_ = bytes_parsed_; |
| auto t_load_s = |
| static_cast<double>(base::GetWallTimeNs().count() - t_parse_started_) / |
| 1e9; |
| fprintf(stderr, "\rLoading trace %.2f MB (%.1f MB/s)%s", |
| static_cast<double>(bytes_parsed_) / 1e6, |
| static_cast<double>(bytes_parsed_) / 1e6 / t_load_s, |
| (eof_ ? "\n" : "")); |
| fflush(stderr); |
| } |
| } |
| |
| void Rpc::Query(const uint8_t* args, |
| size_t len, |
| const QueryResultBatchCallback& result_callback) { |
| auto it = QueryInternal(args, len); |
| QueryResultSerializer serializer(std::move(it)); |
| |
| std::vector<uint8_t> res; |
| for (bool has_more = true; has_more;) { |
| has_more = serializer.Serialize(&res); |
| result_callback(res.data(), res.size(), has_more); |
| res.clear(); |
| } |
| } |
| |
| Iterator Rpc::QueryInternal(const uint8_t* args, size_t len) { |
| protos::pbzero::QueryArgs::Decoder query(args, len); |
| std::string sql = query.sql_query().ToStdString(); |
| PERFETTO_DLOG("[RPC] Query < %s", sql.c_str()); |
| PERFETTO_TP_TRACE(metatrace::Category::API_TIMELINE, "RPC_QUERY", |
| [&](metatrace::Record* r) { |
| r->AddArg("SQL", sql); |
| if (query.has_tag()) { |
| r->AddArg("tag", query.tag()); |
| } |
| }); |
| |
| return trace_processor_->ExecuteQuery(sql); |
| } |
| |
| void Rpc::RestoreInitialTables() { |
| trace_processor_->RestoreInitialTables(); |
| } |
| |
| std::vector<uint8_t> Rpc::ComputeMetric(const uint8_t* args, size_t len) { |
| protozero::HeapBuffered<protos::pbzero::ComputeMetricResult> result; |
| ComputeMetricInternal(args, len, result.get()); |
| return result.SerializeAsArray(); |
| } |
| |
| void Rpc::ComputeMetricInternal(const uint8_t* data, |
| size_t len, |
| protos::pbzero::ComputeMetricResult* result) { |
| protos::pbzero::ComputeMetricArgs::Decoder args(data, len); |
| std::vector<std::string> metric_names; |
| for (auto it = args.metric_names(); it; ++it) { |
| metric_names.emplace_back(it->as_std_string()); |
| } |
| |
| PERFETTO_TP_TRACE(metatrace::Category::API_TIMELINE, "RPC_COMPUTE_METRIC", |
| [&](metatrace::Record* r) { |
| for (const auto& metric : metric_names) { |
| r->AddArg("Metric", metric); |
| r->AddArg("Format", std::to_string(args.format())); |
| } |
| }); |
| |
| PERFETTO_DLOG("[RPC] ComputeMetrics(%zu, %s), format=%d", metric_names.size(), |
| metric_names.empty() ? "" : metric_names.front().c_str(), |
| args.format()); |
| switch (args.format()) { |
| case protos::pbzero::ComputeMetricArgs::BINARY_PROTOBUF: { |
| std::vector<uint8_t> metrics_proto; |
| base::Status status = |
| trace_processor_->ComputeMetric(metric_names, &metrics_proto); |
| if (status.ok()) { |
| result->set_metrics(metrics_proto.data(), metrics_proto.size()); |
| } else { |
| result->set_error(status.message()); |
| } |
| break; |
| } |
| case protos::pbzero::ComputeMetricArgs::TEXTPROTO: { |
| std::string metrics_string; |
| base::Status status = trace_processor_->ComputeMetricText( |
| metric_names, TraceProcessor::MetricResultFormat::kProtoText, |
| &metrics_string); |
| if (status.ok()) { |
| result->set_metrics_as_prototext(metrics_string); |
| } else { |
| result->set_error(status.message()); |
| } |
| break; |
| } |
| case protos::pbzero::ComputeMetricArgs::JSON: { |
| std::string metrics_string; |
| base::Status status = trace_processor_->ComputeMetricText( |
| metric_names, TraceProcessor::MetricResultFormat::kJson, |
| &metrics_string); |
| if (status.ok()) { |
| result->set_metrics_as_json(metrics_string); |
| } else { |
| result->set_error(status.message()); |
| } |
| break; |
| } |
| } |
| } |
| |
| void Rpc::EnableMetatrace(const uint8_t* data, size_t len) { |
| using protos::pbzero::MetatraceCategories; |
| TraceProcessor::MetatraceConfig config; |
| protos::pbzero::EnableMetatraceArgs::Decoder args(data, len); |
| config.categories = MetatraceCategoriesToPublicEnum( |
| static_cast<MetatraceCategories>(args.categories())); |
| trace_processor_->EnableMetatrace(config); |
| } |
| |
| std::vector<uint8_t> Rpc::DisableAndReadMetatrace() { |
| protozero::HeapBuffered<protos::pbzero::DisableAndReadMetatraceResult> result; |
| DisableAndReadMetatraceInternal(result.get()); |
| return result.SerializeAsArray(); |
| } |
| |
| void Rpc::DisableAndReadMetatraceInternal( |
| protos::pbzero::DisableAndReadMetatraceResult* result) { |
| std::vector<uint8_t> trace_proto; |
| base::Status status = trace_processor_->DisableAndReadMetatrace(&trace_proto); |
| if (status.ok()) { |
| result->set_metatrace(trace_proto.data(), trace_proto.size()); |
| } else { |
| result->set_error(status.message()); |
| } |
| } |
| |
| std::vector<uint8_t> Rpc::GetStatus() { |
| protozero::HeapBuffered<protos::pbzero::StatusResult> status; |
| status->set_loaded_trace_name(trace_processor_->GetCurrentTraceName()); |
| status->set_human_readable_version(base::GetVersionString()); |
| const char* version_code = base::GetVersionCode(); |
| if (version_code) { |
| status->set_version_code(version_code); |
| } |
| status->set_api_version(protos::pbzero::TRACE_PROCESSOR_CURRENT_API_VERSION); |
| return status.SerializeAsArray(); |
| } |
| |
| } // namespace perfetto::trace_processor |