objectivec/DevTools/full_mac_build.sh - third_party/protobuf - Git at Google

 #!/bin/bash
 #
 # Helper to do build so you don't have to remember all the steps/args.

 set -eu

 # Some base locations.
 readonly ScriptDir=$(dirname "$(echo $0 | sed -e "s,^\([^/]\),$(pwd)/\1,")")
 readonly ProtoRootDir="${ScriptDir}/../.."
 readonly BazelFlags="${BAZEL_FLAGS:---announce_rc --macos_minimum_os=11.0}"

 # Invoke with BAZEL=bazelisk to use that instead.
 readonly BazelBin="${BAZEL:-bazel}"

 printUsage() {
   NAME=$(basename "${0}")
   cat << EOF
 usage: ${NAME} [OPTIONS]

 This script does the common build steps needed.

 OPTIONS:

  General:

    -h, --help
          Show this message
    -c, --clean
          Issue a clean before the normal build.
    --full-build
          By default only protoc is built within protobuf, this option will
          enable a full build/test of the entire protobuf project.
    --skip-xcode
          Skip the invoke of Xcode to test the runtime on both iOS and OS X.
    --skip-xcode-ios
          Skip the invoke of Xcode to test the runtime on iOS.
    --skip-xcode-debug
          Skip the Xcode Debug configuration.
    --skip-xcode-release
          Skip the Xcode Release configuration.
    --skip-xcode-osx | --skip-xcode-macos
          Skip the invoke of Xcode to test the runtime on OS X.
    --skip-xcode-tvos
          Skip the invoke of Xcode to test the runtime on tvOS.
    --skip-objc-conformance
          Skip the Objective C conformance tests (run on OS X).
    --skip-xcpretty
          By default, if xcpretty is installed, it will be used, this option will
          skip it even it it is installed.
    --xcode-quiet
          Pass -quiet to xcodebuild.

 EOF
 }

 header() {
   echo ""
   echo "========================================================================"
   echo "    ${@}"
   echo "========================================================================"
 }

 xcodebuild_xcpretty() {
   set -o pipefail && xcodebuild "${@}" | xcpretty
 }

 if hash xcpretty >/dev/null 2>&1 ; then
   XCODEBUILD=xcodebuild_xcpretty
 else
   XCODEBUILD=xcodebuild
 fi

 DO_CLEAN=no
 FULL_BUILD=no
 DO_XCODE_IOS_TESTS=yes
 DO_XCODE_OSX_TESTS=yes
 DO_XCODE_TVOS_TESTS=yes
 DO_XCODE_DEBUG=yes
 DO_XCODE_RELEASE=yes
 DO_OBJC_CONFORMANCE_TESTS=yes
 XCODE_QUIET=no
 while [[ $# != 0 ]]; do
   case "${1}" in
     -h | --help )
       printUsage
       exit 0
       ;;
     -c | --clean )
       DO_CLEAN=yes
       ;;
     --full-build )
       FULL_BUILD=yes
       ;;
     --skip-xcode )
       DO_XCODE_IOS_TESTS=no
       DO_XCODE_OSX_TESTS=no
       DO_XCODE_TVOS_TESTS=no
       ;;
     --skip-xcode-ios )
       DO_XCODE_IOS_TESTS=no
       ;;
     --skip-xcode-osx | --skip-xcode-macos)
       DO_XCODE_OSX_TESTS=no
       ;;
     --skip-xcode-tvos )
       DO_XCODE_TVOS_TESTS=no
       ;;
     --skip-xcode-debug )
       DO_XCODE_DEBUG=no
       ;;
     --skip-xcode-release )
       DO_XCODE_RELEASE=no
       ;;
     --skip-objc-conformance )
       DO_OBJC_CONFORMANCE_TESTS=no
       ;;
     --skip-xcpretty )
       XCODEBUILD=xcodebuild
       ;;
     --xcode-quiet )
       XCODE_QUIET=yes
       ;;
     -*)
       echo "ERROR: Unknown option: ${1}" 1>&2
       printUsage
       exit 1
       ;;
     *)
       echo "ERROR: Unknown argument: ${1}" 1>&2
       printUsage
       exit 1
       ;;
   esac
   shift
 done

 # Into the proto dir.
 cd "${ProtoRootDir}"

 if [[ "${DO_CLEAN}" == "yes" ]] ; then
   header "Cleaning"
   ${BazelBin} clean
   if [[ "${DO_XCODE_IOS_TESTS}" == "yes" ]] ; then
     XCODEBUILD_CLEAN_BASE_IOS=(
       xcodebuild
         -project objectivec/ProtocolBuffers_iOS.xcodeproj
         -scheme ProtocolBuffers
     )
     if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then
       "${XCODEBUILD_CLEAN_BASE_IOS[@]}" -configuration Debug clean
     fi
     if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then
       "${XCODEBUILD_CLEAN_BASE_IOS[@]}" -configuration Release clean
     fi
   fi
   if [[ "${DO_XCODE_OSX_TESTS}" == "yes" ]] ; then
     XCODEBUILD_CLEAN_BASE_OSX=(
       xcodebuild
         -project objectivec/ProtocolBuffers_OSX.xcodeproj
         -scheme ProtocolBuffers
     )
     if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then
       "${XCODEBUILD_CLEAN_BASE_OSX[@]}" -configuration Debug clean
     fi
     if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then
       "${XCODEBUILD_CLEAN_BASE_OSX[@]}" -configuration Release clean
     fi
   fi
   if [[ "${DO_XCODE_TVOS_TESTS}" == "yes" ]] ; then
     XCODEBUILD_CLEAN_BASE_OSX=(
       xcodebuild
         -project objectivec/ProtocolBuffers_tvOS.xcodeproj
         -scheme ProtocolBuffers
     )
     if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then
       "${XCODEBUILD_CLEAN_BASE_OSX[@]}" -configuration Debug clean
     fi
     if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then
       "${XCODEBUILD_CLEAN_BASE_OSX[@]}" -configuration Release clean
     fi
   fi
 fi

 if [[ "${FULL_BUILD}" == "yes" ]] ; then
   header "Build/Test: everything"
   ${BazelBin} test //:protoc //:protobuf //src/... $BazelFlags
 else
   header "Building: protoc"
   ${BazelBin} build //:protoc $BazelFlags
 fi

 # Ensure the WKT sources checked in are current.
 objectivec/generate_well_known_types.sh --check-only

 header "Checking on the ObjC Runtime pddm expansions"
 ${BazelBin} test //objectivec:sources_pddm_expansion_test $BazelFlags

 readonly XCODE_VERSION_LINE="$(xcodebuild -version | grep Xcode\  )"
 readonly XCODE_VERSION="${XCODE_VERSION_LINE/Xcode /}"  # drop the prefix.

 if [[ "${DO_XCODE_IOS_TESTS}" == "yes" ]] ; then
   XCODEBUILD_TEST_BASE_IOS=(
     "${XCODEBUILD}"
       -project objectivec/ProtocolBuffers_iOS.xcodeproj
       -scheme ProtocolBuffers
   )
   if [[ "${XCODE_QUIET}" == "yes" ]] ; then
     XCODEBUILD_TEST_BASE_IOS+=( -quiet )
   fi
   # Don't need to worry about form factors or retina/non retina.
   # NOTE: Different Xcode have different simulated hardware/os support.
   case "${XCODE_VERSION}" in
     [6-9].* | 1[0-2].* )
       echo "ERROR: Xcode 13.3.1 or higher is required." 1>&2
       exit 11
       ;;
     13.* | 14.*)
       XCODEBUILD_TEST_BASE_IOS+=(
           -destination "platform=iOS Simulator,name=iPhone 13,OS=latest"
       )
       ;;
     * )
       echo ""
       echo "ATTENTION: Time to update the simulator targets for Xcode ${XCODE_VERSION}"
       echo ""
       echo "ERROR: Build aborted!"
       exit 2
       ;;
   esac
   if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then
     header "Doing Xcode iOS build/tests - Debug"
     "${XCODEBUILD_TEST_BASE_IOS[@]}" -configuration Debug test
   fi
   if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then
     header "Doing Xcode iOS build/tests - Release"
     "${XCODEBUILD_TEST_BASE_IOS[@]}" -configuration Release test
   fi
   # Don't leave the simulator in the developer's face.
   killall Simulator 2> /dev/null || true
 fi
 if [[ "${DO_XCODE_OSX_TESTS}" == "yes" ]] ; then
   XCODEBUILD_TEST_BASE_OSX=(
     "${XCODEBUILD}"
       -project objectivec/ProtocolBuffers_OSX.xcodeproj
       -scheme ProtocolBuffers
       -destination "platform=macOS"
   )
   if [[ "${XCODE_QUIET}" == "yes" ]] ; then
     XCODEBUILD_TEST_BASE_OSX+=( -quiet )
   fi
   case "${XCODE_VERSION}" in
     [6-9].* | 1[0-2].* )
       echo "ERROR: Xcode 13.3.1 or higher is required." 1>&2
       exit 11
       ;;
   esac
   if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then
     header "Doing Xcode OS X build/tests - Debug"
     "${XCODEBUILD_TEST_BASE_OSX[@]}" -configuration Debug test
   fi
   if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then
     header "Doing Xcode OS X build/tests - Release"
     "${XCODEBUILD_TEST_BASE_OSX[@]}" -configuration Release test
   fi
 fi
 if [[ "${DO_XCODE_TVOS_TESTS}" == "yes" ]] ; then
   XCODEBUILD_TEST_BASE_TVOS=(
     "${XCODEBUILD}"
       -project objectivec/ProtocolBuffers_tvOS.xcodeproj
       -scheme ProtocolBuffers
   )
   case "${XCODE_VERSION}" in
     [6-9].* | 1[0-2].* )
       echo "ERROR: Xcode 13.3.1 or higher is required." 1>&2
       exit 11
       ;;
     13.* | 14.*)
       XCODEBUILD_TEST_BASE_TVOS+=(
         -destination "platform=tvOS Simulator,name=Apple TV 4K (2nd generation),OS=latest"
       )
       ;;
     * )
       echo ""
       echo "ATTENTION: Time to update the simulator targets for Xcode ${XCODE_VERSION}"
       echo ""
       echo "ERROR: Build aborted!"
       exit 2
       ;;
   esac
   if [[ "${XCODE_QUIET}" == "yes" ]] ; then
     XCODEBUILD_TEST_BASE_TVOS+=( -quiet )
   fi
   if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then
     header "Doing Xcode tvOS build/tests - Debug"
     "${XCODEBUILD_TEST_BASE_TVOS[@]}" -configuration Debug test
   fi
   if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then
     header "Doing Xcode tvOS build/tests - Release"
     "${XCODEBUILD_TEST_BASE_TVOS[@]}" -configuration Release test
   fi
 fi

 if [[ "${DO_OBJC_CONFORMANCE_TESTS}" == "yes" ]] ; then
   header "Running ObjC Conformance Tests"
   ${BazelBin} test //objectivec:conformance_test $BazelFlags
 fi

 echo ""
 echo "$(basename "${0}"): Success!"
	#!/bin/bash
	#
	# Helper to do build so you don't have to remember all the steps/args.

	set -eu

	# Some base locations.
	readonly ScriptDir=$(dirname "$(echo $0 \| sed -e "s,^\([^/]\),$(pwd)/\1,")")
	readonly ProtoRootDir="${ScriptDir}/../.."
	readonly BazelFlags="${BAZEL_FLAGS:---announce_rc --macos_minimum_os=11.0}"

	# Invoke with BAZEL=bazelisk to use that instead.
	readonly BazelBin="${BAZEL:-bazel}"

	printUsage() {
	NAME=$(basename "${0}")
	cat << EOF
	usage: ${NAME} [OPTIONS]

	This script does the common build steps needed.

	OPTIONS:

	General:

	-h, --help
	Show this message
	-c, --clean
	Issue a clean before the normal build.
	--full-build
	By default only protoc is built within protobuf, this option will
	enable a full build/test of the entire protobuf project.
	--skip-xcode
	Skip the invoke of Xcode to test the runtime on both iOS and OS X.
	--skip-xcode-ios
	Skip the invoke of Xcode to test the runtime on iOS.
	--skip-xcode-debug
	Skip the Xcode Debug configuration.
	--skip-xcode-release
	Skip the Xcode Release configuration.
	--skip-xcode-osx \| --skip-xcode-macos
	Skip the invoke of Xcode to test the runtime on OS X.
	--skip-xcode-tvos
	Skip the invoke of Xcode to test the runtime on tvOS.
	--skip-objc-conformance
	Skip the Objective C conformance tests (run on OS X).
	--skip-xcpretty
	By default, if xcpretty is installed, it will be used, this option will
	skip it even it it is installed.
	--xcode-quiet
	Pass -quiet to xcodebuild.

	EOF
	}

	header() {
	echo ""
	echo "========================================================================"
	echo " ${@}"
	echo "========================================================================"
	}

	xcodebuild_xcpretty() {
	set -o pipefail && xcodebuild "${@}" \| xcpretty
	}

	if hash xcpretty >/dev/null 2>&1 ; then
	XCODEBUILD=xcodebuild_xcpretty
	else
	XCODEBUILD=xcodebuild
	fi

	DO_CLEAN=no
	FULL_BUILD=no
	DO_XCODE_IOS_TESTS=yes
	DO_XCODE_OSX_TESTS=yes
	DO_XCODE_TVOS_TESTS=yes
	DO_XCODE_DEBUG=yes
	DO_XCODE_RELEASE=yes
	DO_OBJC_CONFORMANCE_TESTS=yes
	XCODE_QUIET=no
	while [[ $# != 0 ]]; do
	case "${1}" in
	-h \| --help )
	printUsage
	exit 0
	;;
	-c \| --clean )
	DO_CLEAN=yes
	;;
	--full-build )
	FULL_BUILD=yes
	;;
	--skip-xcode )
	DO_XCODE_IOS_TESTS=no
	DO_XCODE_OSX_TESTS=no
	DO_XCODE_TVOS_TESTS=no
	;;
	--skip-xcode-ios )
	DO_XCODE_IOS_TESTS=no
	;;
	--skip-xcode-osx \| --skip-xcode-macos)
	DO_XCODE_OSX_TESTS=no
	;;
	--skip-xcode-tvos )
	DO_XCODE_TVOS_TESTS=no
	;;
	--skip-xcode-debug )
	DO_XCODE_DEBUG=no
	;;
	--skip-xcode-release )
	DO_XCODE_RELEASE=no
	;;
	--skip-objc-conformance )
	DO_OBJC_CONFORMANCE_TESTS=no
	;;
	--skip-xcpretty )
	XCODEBUILD=xcodebuild
	;;
	--xcode-quiet )
	XCODE_QUIET=yes
	;;
	-*)
	echo "ERROR: Unknown option: ${1}" 1>&2
	printUsage
	exit 1
	;;
	*)
	echo "ERROR: Unknown argument: ${1}" 1>&2
	printUsage
	exit 1
	;;
	esac
	shift
	done

	# Into the proto dir.
	cd "${ProtoRootDir}"

	if [[ "${DO_CLEAN}" == "yes" ]] ; then
	header "Cleaning"
	${BazelBin} clean
	if [[ "${DO_XCODE_IOS_TESTS}" == "yes" ]] ; then
	XCODEBUILD_CLEAN_BASE_IOS=(
	xcodebuild
	-project objectivec/ProtocolBuffers_iOS.xcodeproj
	-scheme ProtocolBuffers
	)
	if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then
	"${XCODEBUILD_CLEAN_BASE_IOS[@]}" -configuration Debug clean
	fi
	if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then
	"${XCODEBUILD_CLEAN_BASE_IOS[@]}" -configuration Release clean
	fi
	fi
	if [[ "${DO_XCODE_OSX_TESTS}" == "yes" ]] ; then
	XCODEBUILD_CLEAN_BASE_OSX=(
	xcodebuild
	-project objectivec/ProtocolBuffers_OSX.xcodeproj
	-scheme ProtocolBuffers
	)
	if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then
	"${XCODEBUILD_CLEAN_BASE_OSX[@]}" -configuration Debug clean
	fi
	if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then
	"${XCODEBUILD_CLEAN_BASE_OSX[@]}" -configuration Release clean
	fi
	fi
	if [[ "${DO_XCODE_TVOS_TESTS}" == "yes" ]] ; then
	XCODEBUILD_CLEAN_BASE_OSX=(
	xcodebuild
	-project objectivec/ProtocolBuffers_tvOS.xcodeproj
	-scheme ProtocolBuffers
	)
	if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then
	"${XCODEBUILD_CLEAN_BASE_OSX[@]}" -configuration Debug clean
	fi
	if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then
	"${XCODEBUILD_CLEAN_BASE_OSX[@]}" -configuration Release clean
	fi
	fi
	fi

	if [[ "${FULL_BUILD}" == "yes" ]] ; then
	header "Build/Test: everything"
	${BazelBin} test //:protoc //:protobuf //src/... $BazelFlags
	else
	header "Building: protoc"
	${BazelBin} build //:protoc $BazelFlags
	fi

	# Ensure the WKT sources checked in are current.
	objectivec/generate_well_known_types.sh --check-only

	header "Checking on the ObjC Runtime pddm expansions"
	${BazelBin} test //objectivec:sources_pddm_expansion_test $BazelFlags

	readonly XCODE_VERSION_LINE="$(xcodebuild -version \| grep Xcode\ )"
	readonly XCODE_VERSION="${XCODE_VERSION_LINE/Xcode /}" # drop the prefix.

	if [[ "${DO_XCODE_IOS_TESTS}" == "yes" ]] ; then
	XCODEBUILD_TEST_BASE_IOS=(
	"${XCODEBUILD}"
	-project objectivec/ProtocolBuffers_iOS.xcodeproj
	-scheme ProtocolBuffers
	)
	if [[ "${XCODE_QUIET}" == "yes" ]] ; then
	XCODEBUILD_TEST_BASE_IOS+=( -quiet )
	fi
	# Don't need to worry about form factors or retina/non retina.
	# NOTE: Different Xcode have different simulated hardware/os support.
	case "${XCODE_VERSION}" in
	[6-9].* \| 1[0-2].* )
	echo "ERROR: Xcode 13.3.1 or higher is required." 1>&2
	exit 11
	;;
	13.* \| 14.*)
	XCODEBUILD_TEST_BASE_IOS+=(
	-destination "platform=iOS Simulator,name=iPhone 13,OS=latest"
	)
	;;
	* )
	echo ""
	echo "ATTENTION: Time to update the simulator targets for Xcode ${XCODE_VERSION}"
	echo ""
	echo "ERROR: Build aborted!"
	exit 2
	;;
	esac
	if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then
	header "Doing Xcode iOS build/tests - Debug"
	"${XCODEBUILD_TEST_BASE_IOS[@]}" -configuration Debug test
	fi
	if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then
	header "Doing Xcode iOS build/tests - Release"
	"${XCODEBUILD_TEST_BASE_IOS[@]}" -configuration Release test
	fi
	# Don't leave the simulator in the developer's face.
	killall Simulator 2> /dev/null \|\| true
	fi
	if [[ "${DO_XCODE_OSX_TESTS}" == "yes" ]] ; then
	XCODEBUILD_TEST_BASE_OSX=(
	"${XCODEBUILD}"
	-project objectivec/ProtocolBuffers_OSX.xcodeproj
	-scheme ProtocolBuffers
	-destination "platform=macOS"
	)
	if [[ "${XCODE_QUIET}" == "yes" ]] ; then
	XCODEBUILD_TEST_BASE_OSX+=( -quiet )
	fi
	case "${XCODE_VERSION}" in
	[6-9].* \| 1[0-2].* )
	echo "ERROR: Xcode 13.3.1 or higher is required." 1>&2
	exit 11
	;;
	esac
	if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then
	header "Doing Xcode OS X build/tests - Debug"
	"${XCODEBUILD_TEST_BASE_OSX[@]}" -configuration Debug test
	fi
	if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then
	header "Doing Xcode OS X build/tests - Release"
	"${XCODEBUILD_TEST_BASE_OSX[@]}" -configuration Release test
	fi
	fi
	if [[ "${DO_XCODE_TVOS_TESTS}" == "yes" ]] ; then
	XCODEBUILD_TEST_BASE_TVOS=(
	"${XCODEBUILD}"
	-project objectivec/ProtocolBuffers_tvOS.xcodeproj
	-scheme ProtocolBuffers
	)
	case "${XCODE_VERSION}" in
	[6-9].* \| 1[0-2].* )
	echo "ERROR: Xcode 13.3.1 or higher is required." 1>&2
	exit 11
	;;
	13.* \| 14.*)
	XCODEBUILD_TEST_BASE_TVOS+=(
	-destination "platform=tvOS Simulator,name=Apple TV 4K (2nd generation),OS=latest"
	)
	;;
	* )
	echo ""
	echo "ATTENTION: Time to update the simulator targets for Xcode ${XCODE_VERSION}"
	echo ""
	echo "ERROR: Build aborted!"
	exit 2
	;;
	esac
	if [[ "${XCODE_QUIET}" == "yes" ]] ; then
	XCODEBUILD_TEST_BASE_TVOS+=( -quiet )
	fi
	if [[ "${DO_XCODE_DEBUG}" == "yes" ]] ; then
	header "Doing Xcode tvOS build/tests - Debug"
	"${XCODEBUILD_TEST_BASE_TVOS[@]}" -configuration Debug test
	fi
	if [[ "${DO_XCODE_RELEASE}" == "yes" ]] ; then
	header "Doing Xcode tvOS build/tests - Release"
	"${XCODEBUILD_TEST_BASE_TVOS[@]}" -configuration Release test
	fi
	fi

	if [[ "${DO_OBJC_CONFORMANCE_TESTS}" == "yes" ]] ; then
	header "Running ObjC Conformance Tests"
	${BazelBin} test //objectivec:conformance_test $BazelFlags
	fi

	echo ""
	echo "$(basename "${0}"): Success!"